Mirage F1EE JTAC Issues

[VictorDavion]

I cannot seem to get the module to be able to contact a ground JTAC through any radio both on easy comms and not. It will not transmit. Everything else works as it should except for a JTAC. The JTAC is there in the radio menu with the correct freqs and all. It does nothing when trying to check in. No comm from the aircraft to the JTAC/no transmission. Anyone having the same issues?

Edited May 21, 2024 by VictorDavion

[SEEADLER 111]

 

1 hour ago, VictorDavion said:

I cannot seem to get the module to be able to contact a ground JTAC through any radio both on easy comms and not. It will not transmit. Everything else works as it should except for a JTAC. The JTAC is there in the radio menu with the correct freqs and all. It does nothing when trying to check in. No comm from the aircraft to the JTAC/no transmission. Anyone having the same issues?

 

For me works properly.

[buur]

What is the distance to the JTAC? Must be smaller than 50 nm.

[VictorDavion]

1 hour ago, buur said:

What is the distance to the JTAC? Must be smaller than 50 nm.

Even overhead nothing. No ability to transmit or check in. As far as I can tell everything is set correct in the mission editor. The radio menu option is there to transmit but when I select it my pilot doesn't even initiate the comms. Tried on both easy comms on and off. I have no idea what it could be. Tried other modules and same issue piot doesnt tx but the radio shows he is. Jtac responded with no taskings in viper and m2000.

Edited May 21, 2024 by VictorDavion

[buur]

I had heard that some callsigns not working at the moment. Knowing that Axeman is working. Maybe a reason for your problem.

If not, can you upload the .miz that we can have a deeper look?