fixed Front cabin DA-30 turn indicator problem

[mambo]

Turn indicator is not moving

[derelor]

Thank you, reported [#44764].

[Toriy]

DA-30 rate-of-climb, turn and slip indicator has not working turn indicator in the front cabin. The arrow is not moving if all the switches of the Electrical panel for device failure simulation in the Rear cabin are not On.

[average_pilot]

I re-discovery this lately. All these years I thought that the turn rate indicator was not implemented but actually it's working. It's the instrument failure simulation that is reversed for it so the turn indicator is disabled when the instrument failure in the rear cockpit is off and enabled when instrument failure is on.

[Northstar98]

16 hours ago, average_pilot said:

I re-discovery this lately. All these years I thought that the turn rate indicator was not implemented but actually it's working. It's the instrument failure simulation that is reversed for it so the turn indicator is disabled when the instrument failure in the rear cockpit is off and enabled when instrument failure is on.

 

Weird, doesn't seem to be doing that for me, the front rate of turn indicator isn't operational in the front cockpit regardless of the position of the instrument failure switch (or any of the other switches for that matter).

 

This is on 2.7, latest OB.

Edited May 20, 2021 by Northstar98

[average_pilot]

11 hours ago, Northstar98 said:

 

Weird, doesn't seem to be doing that for me, the front rate of turn indicator isn't operational in the front cockpit regardless of the position of the instrument failure switch (or any of the other switches for that matter).

 

This 2.7 latest OB.

 

I just did a track with the latest OB. What I see when I play the track is what I described above, and same as OP. I don't know if it may be different for others.

yak52turnind.trk

[Northstar98]

2 minutes ago, average_pilot said:

I just did a track with the latest OB. What I see when I play the track is what I described above, and same as OP. I don't know if it may be different for others.

yak52turnind.trk 337.69 kB · 1 download

 

Reproduced.

 

And I see what happened with me, I didn't set the switches properly.

[NineLine]

Reported, thanks!

[Beta Sokol]

Now, at the end of 2024 still nothing...

[Freakmeister51]

Have you noticed, there has been no comments from the ED team. Now that should tell you something! 

[Flappie]

I've just bumped the internal report.

[Toriy]

Any hope here? I  think the problem is with malfunctions imitation system of this gauge in the instructor cockpit. If I switch ON imitation of malfunction for DA30/VD10 the turn indicator starts to work.

[Flappie]

1 hour ago, Toriy said:

I  think the problem is with malfunctions imitation system of this gauge in the instructor cockpit. If I switch ON imitation of malfunction for DA30/VD10 the turn indicator starts to work.

Yes, NineLine noticed this too. The report was bumped less than a month ago.

Edited February 20 by Flappie

[BIGNEWY]

threads merged